SPIKE GLUE SOUDAL FIX ALL FLEXI GLUE 125ml

Glue application:

- assembly of mounting clasps for cat/bird net.

- assembly of anti-bird spikes

Permanently flexible adhesive - new generation hybrid sealant for indoor and outdoor applications. Characterized by extreme joint flexibility, very high joint strength and excellent adhesion to all building substrates. Practically odorless and chemically neutral. Resistant to extreme weather conditions and UV radiation.

Fix All Flexi properties:

excellent adhesion to all building and construction materials - also damp: concrete, brick, natural stone, plasterboard, wood and wood-based materials, metals, glass and ceramics, most plastics, e.g. PVC, polystyrene, polyacrylic and polycarbonates
- chemically neutral - does not react with the substrate, does not discolour the edges of porous materials
- practically odourless does not emit volatile organic compounds - meets the requirements of Emicode EC1 Plus classification
- insensitive to weak acids, bases, solvents and oils
- resistant to weather conditions and UV radiation
- after hardening can be painted - also with water-based paints

PACKAGING: 125 ml WHITE


INSTALLATION INSTRUCTIONS FOR CAT/
BIRD NETTING

1. Clean the surface and apply a layer of glue.

2. Stick the clasps, keeping a distance of about 20 cm between them

3. Wait 24 hours - this is the time for the glue to set

4. Stretch and hook the net. You can cut off the excess.

INSTALLATION INSTRUCTIONS

BIRD SPIKES

1. Before installing the spikes, clean the surface. The surface must be clean, dry, free of grease and dirt.

2. The bases can be shortened at will, adjusting their length to the gluing surface. Maintain a maximum distance of 5 cm between rows of installed spikes or facade elements.

3. Spread the glue along the base to a width of at least 5 mm, press it to the surface being installed. The minimum gluing temperature is +5 degrees C.

Check out our ready-made SPIRDS ASSEMBLY KITS in the MESH tab

Dedicated mounting hooks are available in the ACCESSORIES tab






Before using the adhesive, read the technical data sheet and check whether it is suitable for the glued surface